Add:Room 1606,Building 1,Intellectual Center,FuChun Silicon Valley,398 Kowloon Avenue,YinHu Street,FuYang District,HangZhou,ZheJiang，China
Plastic cups are very common in our daily life and meet everyone's needs for a convenient life. Plastic Mug With the continuous expansion of the industry market, Plastic Mug enterprises in the product automation of large-scale production process also appeared in some urgent problems
A foreign production of disposable thermoformed plastic cup benchmarking enterprises, Plastic Mug need to shape the plastic cup, in its surface coated with a thin layer of emulsified silicone oil to prevent the product in the packaging process sticky. The initial process used by the customer was to immerse the plastic sheet in the release agent before the plastic cup was formed, Plastic Mug and the effect of using the PLC-based spray system was not ideal.
Due to the slow response time of the system, the time delay of the shut-off valve leads to over-spraying of the release agent, which not only causes the waste of the release agent to be serious, but also delays the downstream printing. At the same time due to the quality of the nozzle, Plastic Mug often need to repair, the working environment mist serious phenomenon, the nozzle dripping lead to the production area of the floor slippery.
The AutoJet 1550 modular spray system is equipped with a pressure tank that delivers emulsified silicone oil to an automated nozzle and is precisely sprayed into a molded plastic cup.Plastic Mug The JAU air atomizing nozzle is equipped with a drip-resistant shutoff valve that can be instantaneously sensed when the plastic cup passes through the induction and quickly spreads a thin layer on the inner wall of the plastic cup.
The system can greatly improve production efficiency, eliminating the maintenance time of the monthly nozzle, while saving more than 15% of the consumption of emulsified silicone oil, Plastic Mug can quickly recover the investment costs. Second, the improvement of nozzle performance and better system control eliminates the printing problems caused by the release of the release agent and reduces the defective rate. In addition, Plastic Mug the improved efficiency of transmission, accurate intermittent spraying to eliminate the mist and drip phenomenon, Plastic Mug thereby enhancing the working environment of cleanliness and safety.
Plastic cup in addition to heat will precipitate some chemical substances, but also easy to breed bacteria. Although the plastic surface looks smooth, but in fact there are many gaps, Plastic Mug easy to filth. And the office, people wash most of the cup only with water washed, the cup is not thoroughly cleaned and disinfected. Experts suggest that the office is best to use stainless steel cups or glass, Plastic Mug every day to clean, it is best to use detergent, and rinse with hot water.
The glass does not contain organic chemicals during the firing process. When people drink water or other drinks with glass, do not worry about chemical substances that will be fed into the stomach, Plastic Mug and the glass surface is smooth, easy to clean, Plastic Mug bacteria and Dirt is not easy in the cup wall breeding, so people use the glass to drink water is the most healthy and safest.